How To Maintain Your Tregaskiss Robotic Water-Cooled MIG Gun Equipped with Wire Brake

Wire Brake Tool #450-17 Instructions

1. Remove Wire Brake.
2. Slide the Wire Guide Holder out of the connector cone assembly.
3. Clean any debris or residue on the Wire Guide Holder.

To Reassemble the Wire Guide Holder

1. Line up the Wire Brake Tool with the Wire Guide Holder as shown in the diagram.
2. Slide the Wire Guide Holder back inside the connector cone.
3. Screw in the Wire Brake.

---

Exploded View and Parts Guide

+ Click to enlarge

Item	Description	artT Number
1	Nozzle Assembly	451-x-xx
1A	Nozzle Assembly	401-x-xx
2	Heavy Duty Contact Tip	403-1-xx
2A	TOUGH LOCK® Heavy Duty Contact Tip	403-20-xx
3	Water Cooled Retaining Head Assembly	454-1
3A	TOUGH LOCK Water-Cooled Retaining Head Assembly	404-30
4	Water-Cooled Neck Assembly	495-xx
4A	TOUGH LOCK Water-Cooled Neck Assembly	494-xx
5	Wire Brake Assembly (see chart below)	WB-xxx
5A	Wire Brake	499
5B	Wire Guide Holder	See Below Chart
6	Front House Assembly	497
7	Blue Water Line	656-15
8	Conduit Lube	657-15
9	Power Cable Assembly	659-xx
10	Water-Cooled Outer Jacket	663-1-15
11	Water Line Universal Adaptor Assembly	664-400
12	Power Pin Insulator	664-6
13	Handle Assembly	666-10
14	Rear Housing Assembly	416-15
15	Power Pin Quick-Connect	214
16	Liner Assembly	415-xx-xx
17	Water Line (OUT) – 20″ Long (Blue)	658-1
18	Water Line (IN) – 20″ Long (Red)	658
19	Oetiker Clamp (9.5 mm)	656-1
20	Wire Brake Tool	450-17
21	Oetiker Clamp (11.3 mm)	413-5
22	Air Tube	499-9-15
23	Jump Liner (see chart below)	495-18-xxx
24	Gun Mount for Wire Brake	AS-49-00-XW
25	Power Pin Insulator	414-400-30

---

Part Number Chart for Items 5, 5B, and 23

Item 5	Item 5B	Item 23	Wire Size
WB-100	498	495-18-35	0.045″
WB-110	498-116	495-18-116	0.052″ – 1/16″

Back to top

INS028 REV 11/05