NEW PRODUCT —
Tregaskiss Power Pin for Fronius VR1500 Wire Feeders
July 1, 2009
Tregaskiss has designed a power pin (part #214-41) that can be used in place of the actual Fronius® Power Pin for the VR15000 wire feeder.
This new power pin is compatible with Tregaskiss TOUGH GUN® robotic and automatic MIG guns and Bernard® T-Gun™ semi-automatic MIG guns (formerly Tregaskiss TOUGH GUN semi-automatic MIG guns).
- Threads into all Tregaskiss unicables (except Euro) and is the standard Fronius power pin for TOUGH GUN ThruArm™ series robotic MIG guns
- Compatible with Motoman® unicables on teh EA/SSA Series robots
- Designed specifically for use with QUICK LOAD® liners
A liner cap adaptor (part #214-41-3) is also available for upgrading existing Fronius power pins to the QUICK LOAD liner system.


QUICK LOAD™ Liner System by replacing it with the
Tregaskiss Liner Cap (part #214-41-3).
Fronius wire feeders can come with several types of connections. The following chart indicates the recommended Tregaskiss power pin solution for each:
Fronius® Feeder Connection Type | Tregaskiss Part Number |
---|---|
Fronius “North America” Power Pin | 214-17 |
Tweco® #4 | 214 |
Euro Connection | Euro |
Fronius Power Pin #4.045.848.638 for VR1500 Feeder | 214-41 |
Fronius F++ | Not Available |