Power pins provide a direct connection for wire, electrical current and gas flow between various feeder models and MIG welding guns. Power pins thread in easily to the rear gun handle block. Tightening the power pin with a wrench is recommended to ensure a tight connection.
Power Pins for BTB, TGX® and Legacy T-Gun™ Semi-Automatic Air-Cooled MIG Guns
For Airco® Feeders
| 5060T | for models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD |
For ESAB® Feeders
| 5060T | for models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD |
For ESAB® NAS Feeders
| 214-12 | for models: Multimaster 260, DuraDrive 4-30, DuraDrive 4-48 |
For Hobart® Feeders
| 2200137 | for models: Ironman Series |
| 214 | for models: BETA-MIG Series, Digital 2000, Dual Digital, PortaFeed Series, UltraFeed Series, Handler |
| 214-12 | for models: 200, 2400 (Large Pin) |
For L-Tec® Feeders
| 5060T | for models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD |
For Lincoln® Feeders
| 214 | for models: SP-85, SP-86, SP-100, SP-100T, SP-125plus, SP-130, SP-130T, SP-150, SP-170, SP-200, SP-250, IdealARC SP-255, MIG Pak10, MIG Pak 55, WELD Pak 100 |
| 214-2-1 | for models: LN7, LN8, LN9, LN-22, LN-23P, LN-25, Suitcase, LN-741, LN-742, Synergic 7 |
For Miller® Feeders
| 2200137 | for all models except 10 Series, 30 Series, 35 Series, 70 Series, 80 Series, MIGman and XRA |
| 2200140 | for models: 10 Series, 10E, 30 Series, 30A, 30B, 30E, 70 Series, 70A, 80 Series, 80A, MM10A, XRA |
For OTC Daihen® Feeders
| 2200140 | for models: CM-145, CM-146, CM-147, CM-231, CM-747, DynaAuto |
For OXO™ Feeders
| 427-12 | for models: AVC-8Q, AVC-30Q |
For Thermal Arc® Feeders
| 214 | for models: 210GM, 250GM, DIGITAL 2000, TAF-2, TAF-4 |
Power Pins for Legacy Q-Gun™ and S-Gun™ Semi-Automatic Air-Cooled MIG Guns
| 2200098 | for Hobart® feeder connections |
| 2200099 | for Lincoln® feeder connections |
| 2200101 | for Miller® feeder connections |
| 2200102 | for National® feeder connections |
| 2200108 | for OXO™ feeder connections |
| 2200118 | for Tweco® #4 feeder connections |
| 2200104 | for Tweco #5 feeder connections |
Power Pin Kits for BTB, TGX and Legacy T-Gun™ Semi-Automatic Air-Cooled MIG Guns
For Airco® Feeders
| 1880259E | for models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD |
For ESAB® Feeders
| 1880259E | for models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD |
For ESAB® NAS Feeders
| 1880259T4 | for models: Multimaster 260, DuraDrive 4-30, DuraDrive 4-48 |
For Hobart® Feeders
| 1880259M | for models: Ironman Series |
| 1880259T4 | for models: BETA-MIG Series, Digital 2000, Dual Digital, PortaFeed Series, UltraFeed Series, Handler |
| 1880259T5 | for models: 200, 2400 (Large Pin) |
For L-Tec® Feeders
| 1880259E | for models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD |
For Lincoln® Feeders
| 1880259T4 | for models: SP-85, SP-86, SP-100, SP-100T, SP-125plus, SP-130, SP-130T, SP-150, SP-170, SP-200, SP-250, IdealARC SP-255, MIG Pak10, MIG Pak 55, WELD Pak 100 |
| 1880259L | for models: LN7, LN8, LN9, LN-22, LN-23P, LN-25, Suitcase, LN-741, LN-742, Synergic 7 |
For Miller® Feeders
| 1880259M | for all models except 10 Series, 30 Series, 35 Series, 70 Series, 80 Series, MIGman and XRA |
| 1880259B | Bernard™ Quick Disconnect Kit for models: 10 Series, 10E, 30 Series, 30A, 30B, 30E, 70 Series, 70A, 80 Series, 80A, MM10A, XRA |
For OTC Daihen® Feeders
| 1880259B | Bernard Quick Disconnect Kit for models: CM-145, CM-146, CM-147, CM-231, CM-747, DynaAuto |
For OXO™ Feeders
| 1880259X | for models: AVC-8Q, AVC-30Q |
For Thermal Arc® Feeders
| 1880259T4 | for models: 210GM, 250GM, DIGITAL 2000, TAF-2, TAF-4 |
Direct Plug Kits for Legacy Q-Gun™ and S-Gun™ Semi-Automatic Air-Cooled MIG Guns
| 1199E | for Euro style feeder connections |
| 1199H | for Hobart® feeder connections |
| 1199L | for Lincoln® feeder connections |
| 1199M | for Miller® feeder connections |
| 1199N | for National® feeder connections |
| 1199X | for OXO™ feeder connections |
| 1199T4 | for Tweco® #4 feeder connections |
| 1199T5 | for Tweco #5 feeder connections |
If your feeder does not appear in the charts above, please see our quick-connect blocks and adaptors page for additional connection options.
If your feeder does not appear in the charts above, please see our quick-connect blocks and adaptors page for additional connection options.
For Airco® Feeders
| 425 | for models: Auto-Pack 130, Dip-Pack 200 (New), Dipstick 160 (New), System, Universal, MIGhty 1, Med20, Med20 Synergic, Med40, Med40 Synergic |
For Century® Feeders
| 425 | for models: All Star, Solar 2-125 (Old), Solar165 117-003 |
| 214-5 | for models: Century (Powcon® feeder) |
For Cloos® Feeders
| 214-42 | for models: Euro style |
For ESAB® Feeders
| 425 | for models: Med30, MIG 2E, MIG 4HD, MIG 4HD Dual, Mobile Master, ESAB MIG C420 |
| 414-12 | for models: Non-Euro |
| 214-4 | for models: feeders with “MT”-style Quick Connect Block |
For Fronius® Feeders
| 214-41 | for models: ThruArm™ Style: VR 1500 M, VR 1500 PAP |
For Hansen® Feeders
| 425 | for models: MIG 160, 1000, 2000 |
For Hobart® Feeders
| 214 | for models: Beta-MIG (New Style), Beta-MIG 250, 251, Dual Feeder, Digital 2000, Dual Digital, Porta-Feed 17, Ultra-Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC |
| 214-4 | for models: Handler 120, 150, Beta-MIG 170, Beta-MIG 200, Porta-Wire CC/CV, 2200 Feeder, 2210 Feeder |
| 214-1 | for models: Hobart Beta-MIG 261 (Part #903533), Olympic 22-P, Olympic VS, Ironman 275 |
| 214-12 | for models: 200, 2400 (large pin) |
| 214-29 | for models: Handler 135, Handler 175 |
For Lincoln® Feeders
| 214 | for models: Wirematic 250, 255 (NOTE: Interference with standard handle gun shroud), SP-85, SP-86, SP-100, SP-100T, SP-125Plus, SP-130, SP-130T, SP-150, SP-170, SP-200, SP-250, IdealARC SP-255, MIG Pak 10, MIG Pak 55, Weld Pak 100, Power-MIG 255, Power-MIG 200, 250, 300, 350 MC, Power-Feed 10M, Power-Feed 25M, DH-10, LN-10 (New Style), LN-25 PRO, STT-10 — NOTE: These feeders can also have bushings for Tweco® #5, Lincoln and Miller®, Power-MIG 200, Power-MIG 250 |
| 214-7 | for models: LN4, LN5, LN6, LN7, LN8, LN9, LN22, LN25, LN742, Suitcase, IdealARC SP-150, NA5R, Power-Feed 10 (Robotic), Power Wave 450/455, Synergic 7 |
| 214-2 | for models: LN7, LN8, LN9, LN22, LN25, Suitcase, LN742, Synergic 7 |
| 425 | for models: PowerWave 450, Syndergic 7 |
| 214-40 | for models: PowerWave 4R Series |
For Linde® / L-Tec® Feeders
| 425 | for models: MIGMaster 250, 4HD, MIG2E |
For Miller® Feeders
| 214-1 | (Robotic) for models: Cricket, Intellimatic, Sidekick, D-51A, Millermatic 130, 150, 200, 250, 250MP, 300, MM-35 (New), MM90, New Automatic 1, PortaMIG, S32P, S42GL, S52A, S54A, Swing Arc Dual Swing, Swicng Arc Single, S32S, 52D, 54D, 52E, 54E, Shop Master 300, 22 Series, 60 Series, 70 Series, Millermatic 130XP, Challenger 172, 185, Vintage, 250X, Suitcase 8VS, 12VS, R115 |
| 214-6-116 | (Semi-Automatic) for models: Cricket, Intellimatic, Sidekick, D-51A, Millermatic 130, 150, 200, 250, 250MP, 300, MM-35 (New), MM90, New Automatic 1, PortaMIG, S32P, S42GL, S52A, S54A, Swing Arc Dual Swing, Swicng Arc Single, S32S, 52D, 54D, 52E, 54E, Shop Master 300, 22 Series, 60 Series, 70 Series, Millermatic 130XP, Challenger 172, 185, Vintage, 250X, Suitcase 8VS, 12VS, R115 |
| 214-29 | for models: Firefly 130 |
For OTC Daihen® Feeders
| 214-39 | for models: CM741, CMRE741, AF4001, New D Series |
For OXO™ Feeders
| 427 | for models: PS-60Q, AVC-30Q |
For Panasonic® Feeders
| 214-13 | for models: Panasonic, Gun Slinger 260 |
| 214-30 | for all models (push-to-connect gas fitting) |
For Powcon® Feeders
| 425 | for models: PD10, 22 Series, 60 Series, PDVS11 |
| 214 | for models: PD1, PD2 |
For Snap-On® Feeders
| 214 | for models: FM140A |
For Hobart® Feeders
| 214W | for models: Beta-MIG (New Style), Beta-MIG 250, 251, Dual Feeder, Digital 2000, Dual Digital, Porta-Feed 17, Ultra-Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC |
| 214-1W | for models: Hobart Beta-MIG 261 (Part #903533), Olympic 22-P, Olympic VS, Ironman 275 |
| 214-12W | for models: 200, 2400 (large pin) |
For Lincoln® Feeders
| 214W | for models: Wirematic 250, 255 (NOTE: Interference with standard handle gun shroud), SP-85, SP-86, SP-100, SP-100T, SP-125Plus, SP-130, SP-130T, SP-150, SP-170, SP-200, SP-250, IdealARC SP-255, MIG Pak 10, MIG Pak 55, Weld Pak 100, Power-MIG 255, Power-MIG 200, 250, 300, 350 MC, Power-Feed 10M, Power-Feed 25M, DH-10, LN-10 (New Style), LN-25 PRO, STT-10 — NOTE: These feeders can also have bushings for Tweco® #5, Lincoln and Miller®, Power-MIG 200, Power-MIG 250 |
| 214-7W | for models: LN4, LN5, LN6, LN7, LN8, LN9, LN22, LN25, LN742, Suitcase, IdealARC SP-150, NA5R, Power-Feed 10 (Robotic), Power Wave 450/455, Synergic 7 |
| 214-40W | for models: PowerWave 4R Series |
For Miller® Feeders
| 214-1W | (Robotic) for models: Cricket, Intellimatic, Sidekick, D-51A, Millermatic 130, 150, 200, 250, 250MP, 300, MM-35 (New), MM90, New Automatic 1, PortaMIG, S32P, S42GL, S52A, S54A, Swing Arc Dual Swing, Swicng Arc Single, S32S, 52D, 54D, 52E, 54E, Shop Master 300, 22 Series, 60 Series, 70 Series, Millermatic 130XP, Challenger 172, 185, Vintage, 250X, Suitcase 8VS, 12VS, R115 |
For Panasonic® Feeders
| 214-30W | for all models (push-to-connect gas fitting) |
For Powcon® Feeders
| 214W | for models: PD1, PD2 |
For Snap-On® Feeders
| 214W | for models: FM140A |