Products
Documentation
Articles

RT-1000 Reamer Test Box

Troubleshoot your TOUGH GUN® TT4A reamer robotic nozzle cleaning station quickly and easily with the reamer test box. This test box comes with a 6-foot, 5-pin cordset which allows you to test your reamer from a safe distance to troubleshoot the following: Ream cycle SINK/SOURCE function(s) Sprayer function Anti-spatter liquid fluid level signal Wire cutter […]

read more...

Nozzle Detect

A recommended accessory for the TOUGH GUN® TT4A and TT4E reamer, nozzle detect alerts maintenance personnel when the nozzle on the robotic MIG gun is no longer present, before a weld is attempted. This reduces rework and scrap costs caused by welding without a nozzle. This detection system uses a proximity sensor, which is mounted […]

read more...

Reamer Stand

Custom height. Quick installation. Easy on the budget. Tregaskiss provides a durable but simple fixed height stand for all TOUGH GUN® TT4A and TT4E reamer robotic nozzle cleaning stations. TOUGH GUN reamer stands are available in heights between 18 and 36 inches in 6-inch increments. OverviewSpecsPart Numbers Competitively priced due to simplified design Facilitates quick and accurate reamer change-outs […]

read more...

Filter/Regulator

The filter/regulator unit from Tregaskiss is a recommended accessory that helps extend the life of your TOUGH GUN® reamer investment. The filter works to clean the air supply to the reamer and restrict debris from reaching the motor, while the regulator ensures optimal air pressure is achieved at the unit. This can be ordered separately […]

read more...

Lubricator

This dedicated motor lubricator maximizes performance and protects your TOUGH GUN® reamer investment by extending the life of the motor. This lubricator is now a standard component on all TOUGH GUN TT4A and TT4E Reamers. It is also highly effective for use in damp and moisture rich environments. OverviewPart Numbers Factory set for optimal pneumatic […]

read more...

Spray Containment

A perfect addition to the TOUGH GUN® TT4A and TT4E Reamers The innovative spray containment unit from Tregaskiss helps prevent air contamination by catching anti-spatter overspray in its sealed basin. The collected anti-spatter is then channeled away from the spray containment unit to a convenient point of disposal. Now standard! Can also be used on […]

read more...

Cutter Blades

Reliable and Durable. Competitive pricing. TOUGH GUN® cutter blades are designed for use with the TOUGH GUN TT4A or TT4E reamer and are engineered from harder, stronger material, making them more resistant to breaking, chipping or cracking. Designed with stronger edges to allow for improved cutting and cleaning performance, these cutter blades are a perfect […]

read more...

TOUGH GARD Anti-Spatter Liquid

TOUGH GARD® anti-spatter liquid is a ready-to-use water-soluble, non-toxic product developed to address the performance and environmental concerns of metal fabricators. Unlike oil-based anti-spatter solutions, TOUGH GARD anti-spatter liquid won’t clog the sprayer. By prolonging the life of your consumables and reducing the need for downtime, TOUGH GARD anti-spatter liquid can help to reduce your […]

read more...

TOUGH GARD Anti-Spatter Multi-Feed System

Lower your operating costs, minimize downtime and increase safety by introducing a TOUGH GARD® anti-spatter multi-feed system to your facility. The TOUGH GARD anti-spatter multi-feed system provides a continuous supply of anti-spatter liquid to up to 10 TOUGH GUN® reamer robotic nozzle cleaning stations from a single 5-gallon pail or 55-gallon drum of TOUGH GARD […]

read more...

Anti-Spatter Sprayer

Use the anti-spatter sprayer with your TOUGH GUN® reamer to help prevent spatter build-up, boosting productivity by maintaining consistent weld quality and reducing downtime for routine maintenance. This sprayer comes standard with the TOUGH GUN TT4A and TT4E reamer and can be used with TOUGH GARD® anti-spatter liquid to create the ultimate nozzle cleaning station […]

read more...

Wire Cutter

The TOUGH GUN® wire cutter from Tregaskiss removes the ball at the end of the welding wire to provide smooth arc starts and consistent wire stick-out (ideal for Touch Sensing) This system cuts a variety of wire types, including stainless steel, aluminum and flux-core, in sizes up to 1/16″ (1.6 mm). OverviewSpecsPart Numbers Unique carbide […]

read more...